Adtran

GEO Redundancy in an Adtran 908e

1. Log into the Adtran’s Web UI

2. Navigate to Utilities, then click on Configuration

3. Inside the Download Config header, click on the Download Config Button

4. Find the CW Voice Trunk Section and update the following

   1. Add “sip-server secondary core1-atl.secureuc.net” and place it under “sip-server primary”

5. Save the configuration

6. Navigate to Utilities, then Configuration, in the Web UI, if you are not already there

7. Under the Upload Config header, click on the “Choose File” button

8. Select the recently saved config file

9. Click the Upload Button

10. Click Save on the Top Right of the Web UI

11. Navigate to Utilities, then Reboot Unit and click on “Save and Reboot”

12. Repeat Steps 1-3 and then verify the changes have been saved.